OBD2shop.co.uk Official Blog

OBD2 Tool UK eshop Technical Support

  • lonsdor k518 pro banner
  • 2m2 tank pro banner
  • banner-xhorse
  • Home
  • ECU Programming
  • Key Programming
  • Mileage Correction
  • Xhorse VVDI
  • Autel Tools
  • Lonsdor K518ise
  • Launch X431
  • MB SD C4

Month: September 2020

launch-crp123x-scanner

Launch CRP123 Vs CRP123X Vs CRP123E

September 30, 2020 Sales OBD2shop.co.uk 0

What is the difference between Launch CRP123, CRP123X and CRP123E? Compared with Launch CRP123, Launch CRP123X and CRP123E have more advantages in hardware and software. […]

launch-crp123-crp129-update-07

How to update Launch CRP123/CRP129 Code Reader

September 29, 2020 Sales OBD2shop.co.uk 0

Launch CRP123/CRP129 Code Reader Support Lifetime Free Upgrade and this post will guide you on how to upgrade it. Here are the steps: Step 1. […]

svci-2018-error-01

SVCI 2018 prompts “The device has been detected” after installing the software

September 28, 2020 Sales OBD2shop.co.uk 0

Customer problem: I have a svci 2018 and installed the software today but it showed the following error message, what can I do? can you […]

launch-x431-v-8inch-replace-sd-card-01

Replace Launch X431 V 8inch a bigger SD card possible?

September 27, 2020 Sales OBD2shop.co.uk 0

Have Launch X431 V 8inch with Android V7.1.1, is it possible to replace a new bigger SD card? The answer is yes. 1. Please remove […]

2019-chevy-cruze-cluster-calibration

Will Autel IM608 calibrate cluster on 2019 Chevy Cruze?

September 25, 2020 Sales OBD2shop.co.uk 0

2019 Chevy Cruze took Canadian cluster out to change faceplate, put back in all needles aligned to ZERO. When i turn the vehicle on everything […]

godiag-gt100-connect-cas4-to-read-ecu-data-02

Godiag GT100 read CAS4 ECU data with Autel MD808 Pro

September 24, 2020 Sales OBD2shop.co.uk 0

Hey, buddies, look at what I have: A Godiag GT100 OBD2 break out box, an Autel MaxiDiag MD808 Pro code reader, a CAS4 ECU box, […]

save-diagnostic-results-in-mb-star-das

How to save diagnostic results in MB Star DAS?

September 23, 2020 Sales OBD2shop.co.uk 0

Question: when using DAS in MB Star, I want to save diagnostic results from a session and then be able to review my Quick Test […]

iprog-pro-vw-skoda-2013-2020-mileage-programming

How to use iprog pro for VW Skoda 2013-2020 mileage programming?

September 22, 2020 Sales OBD2shop.co.uk 0

Question on Iprog+ Iprog Pro Programmer V84: when using it for VW/Skoda 2013-2020 mileage programming, will I directly insert the adapter into the socket of […]

mb-sdc4-configassist-unable-to-access-service-01

Fixed! mb sdc4 configAssist “unable to access service”

September 18, 2020 Sales OBD2shop.co.uk 0

One user of mb sdc4 tried to activate Xentry and need to open “configAssist”, got problem with it ” unable to access service…” So he […]

iprog-read-mc68hc705b32-uch-01

Iprog read MC68HC705B32 (UCH) possible and how?

September 18, 2020 Sales OBD2shop.co.uk 0

How to read MC68HC705B32 (UCH) on the Megane in circuit with Iprog programmer? the diagram that the iprog says it is to read the processor, […]

launch-x431-v-8-inch

Launch X431 troubleshoot Ford Transit mk 6 2.4 di no start

September 16, 2020 Sales OBD2shop.co.uk 0

Car model and year: Ford Transit mk 6 2.4 di Symptom: Drove about 20 miles, no issues, parked up for few hours, came back and […]

vxdiag-c6

VCX / DoIP firmware & Benz C6 driver update

September 15, 2020 Sales OBD2shop.co.uk 0

VXDIAG VCX update on 09/15/2020: VCX firmware: V1.8.2.0 DoIP firmware: V1.7.3 Benz C6 driver: V3.2.0.200915 VXDIAG VCX v1.8.2.0 firmware update: FIX the error:TP20 protocol programming […]

x431-v-plus-diagnose-ford-focus-2-0-tdci-engine

Will Launch X431 V+ diagnose Ford Focus 2.0 tdci Engine?

September 14, 2020 Sales OBD2shop.co.uk 0

Question: When I use Launch X431 V+ to diagnose Ford Focus 2.0 tdci, the “Engine” system won’t display and can’t be scanned, but all the […]

xtool-kc501-read-write-eeprom-chip-23

Xtool KC501 Read Write MCU / EEPROM Chip User Manual

September 11, 2020 Sales OBD2shop.co.uk 0

One of Xtool KC501 functions is to Read Write MCU / EEPROM Chips. Here we go on how to operate. Let’s go! First, Connect USB […]

launch-thinkdiag-bmw-error-code-2-solution-03

Solved! ThinkDiag BMW error code -2 & read VIN info failed

September 10, 2020 Sales OBD2shop.co.uk 0

Bought ThinkDiag to diagnose BMW one week ago, I got error message “Failed to obtain the VCI control information via internet, error code is -2″ and […]

Iprog pro

Read 2004 Ford F150 speedometer miles with iprog

September 9, 2020 Sales OBD2shop.co.uk 0

Question: have 2004 Ford f150 speedometer, how to read miles with iprog? Answer: THIS IS SIMPLE AS OBD. Fire up iprog soft, connect programmer with […]

autel-maxiim-im68-update-error-solution-07

Autel MaxiIM IM608 update error ” Network busy (#1)” solution

September 9, 2020 Sales OBD2shop.co.uk 0

Some customers have trouble connecting the Autel MaxiIM IM608 device to the Autel update server. Show error as follows: Possible reason: The network environment disallows […]

Posts pagination

1 2 »

SEARCH

Read PinCode and Reset ECU for Peugeot/Citroen

banner-1

Categories

  • Auto Diagnostic software
  • Auto Locksmith Tools
  • BMW diagnostic tool
  • Car Diagnostic Tools
  • Car Key Chips and Blanks
  • Car key programmer
  • Cummins truck diagnostic tool
  • Diagnostic tool for Benz
  • ECU Chip Tuning
  • Foxwell diagnostic tools
  • GM Diagnostic Tool
  • Injector Cleaner & Tester
  • key cutting machine
  • Mileage correction Tool
  • OBD2 Code Reader Scanner
  • Obd2shop.co.uk Notice
  • Original Autel Tools
  • Original Godiag Tools
  • Original Launch X431 Diagnostic Tools
  • Original OBDSTAR Tools
  • Original Xhorse VVDI Tools
  • Original Xtool Tools
  • Original Xtuner Diagnostic Tools
  • Professtional Truck Diagnostic tool
  • TOPDON Diagnostic Tool
  • Uncategorized
  • VAG diagnostic tool
  • Vident Scan Tool

Follow us on Facebook

Facebook

What powerful functions can Launch X431 Pad V perform?

Recent Posts

  • How to Perform a Throttle Relearn on a 2024 Zongshen Aprilia APR250
  • Celebrate OBD2shop.co.uk’s 14th Anniversary with Us!
  • Solved: YANHUA ACDP A51D License BMW Clear ISN Data Error
  • How to Activate LAUNCH Europe Security Gateway (SGW) License?
  • Guide: Writing VIN Code on a 2022 Aprilia RS660 Using OBDSTAR MOTOMASTER
  • Solved: Yanhua ACDP 2016 BMW G12 750i “Obtain password error”
  • TOPDON TopScan Pro OBD2 Scanner User Manual
  • Launch X431 PRO3S+ Elite Registration and Update Guide
  • How to Activate Magic Motorsport Flex ECU Tool Software?

Related websites

Xhorsevvdi.com

Xtool.co.uk

Auteldiag.com

Xhorse.co.uk

Contact us

WhatsApp: +86 13983755934 email: Sales@OBD2shop.co.uk telephone: +86 13983755934  obd2shop.co.uk facebookFacebook  obd2shopc.o.uk twitterTwitter  obd2shop.co.uk youtubeYouTube

Copyright © 2025 | WordPress Theme by MH Themes