This is a guide to demonstrate how to use Godiag GT101 PIRT Power Probe main functions. Including positive & negative electricity detection, component activation test, relay test & fuel injector cleaning.
Godiag GT101 Circuit Tester User Manual Download
Check video for Godiag GT101 unpacking & function display
How Godiag GT101 detect positive & negative electricity?
1.When detecting the positive pole of battery: GT101 flashes red light quickly and its buzzer emits a high-frequency beeping sound.
2.When detecting the negative electrode of battery: the middle indicator of GT101 screen lights green and flashes slowly, its buzzer emits a low-frequency beeping sound.
3.If GT101 Power Probe does not respond, indicating that no electricity was detected. Maybe that line is broken. We can further probe to locate the breakpoint and then go to repair.
How to do component activation test with GT101 PIRT?
Taking a light bulb as demonstration.
1.Clip GT101 black ground wire to the bulb, which will input 12V to the light bulb.
2.Once the bulb lights up normally that means it works fine.
Taking a motor as a demonstration.
1.Clip GT101 black ground wire to the motor, which will input 12V power to the motor.
2.If the motor runs normally, which indicates it works OK. There’s no problem with the motor.
How to do relay test with GT101 circuit analyzer?
The relay must be removed from the car, because the connection adapter is one-to-one with the relay interface.
1.Connect relay with adapter.
2.After connection, press the GT101 yellow button.
3.If the relay indicator lights are all on, and hearing a sound of pulling in, which indicates the detected relay is normal. Otherwise, if the leftmost indicator light on GT101 device is always flashing green, which indicates the detected relay is broken.
How to clean fuel injector with Godiag GT101?
1.First connect adapter to the fuel injector. The fuel injector generally has 2 specifications of interfaces, users can plug in according to needs.
2.Insert fuel injection nozzle cleaning connector into the cleaning agent’s pressure tank. Press GT101 yellow button to start cleaning(When cleaning, try to hold the fuel injection nozzle tightly to avoid being sprayed in process).
3.After cleaning, release the fuel injection nozzle to clean the connector. Press GT101 yellow button to close the cleaning.
Read also:
4 Most Recommended Affordable Power Probe 2021
http://blog.obd2shop.co.uk/4-most-recommended-affordable-power-probe-2021/
