Obdstar Toyota 8A H non-smart transponder all key lost IMMO upgrade V32.45 was released, applies to Obdstar X300 DP Plus & Obdstar X300 Pro4. It supports program keys without disassembly or immo box replacement.
Details added:
Brand | Function | Models | Remarks |
TOYOTA | 8A H non-smart transponder no need to disassemble or replace the immo box all keys lost programming. | Work on RAV4, HILUX, CROWN, KLUGER, COROLLA, CAMRY, LEVIN, PRADO, REIZ. | Work with P002 Adapter, Key Sim, TOYOTA-1 Cable + TOYOTA-2 Cable, Multi-functional ECU Flash Cables.
(All are available, please contact service online for details.) |
Key Programming Procedure:
Program 2017 Toyota Levin Blade Key When All Key Lost Success
AKL Read Immo Data Function Equipment List
1. Diag cable OBD connector(male)
2. P002 adapter
3. Connect P002 connector(female)
4. Connect vehicle OBD diag connector(male)
5. Lock plug
6. Relay plug
7. Battery clip(positive pole)
8. Jumper plug(relay)
9. Jumper plug(fuse blue)
10. Jumper plug(fuse brown)
11. Connect P002 connector TOYOTA-1 female (BENCH)
12. Connect ECU connector TOYOTA-1 female (BENCH)
13. TOYOTA-1 cable 12V power supply(BENCH)
AKL Bench Mode Wiring Diagram
AKL OBDII Mode Wiring Diagram(No Need To Disassemble)
Step 1. connect 1, 2, 3 together;
Step 2. plug 4 into the vehicle’s OBDII port;
Step 3. remove the lower shell of the vehicle ignition switch lock, pull out the plug of the ignition switch lock, plug of the ignition switch lock plug into No.5;
Step 4.
Method1: unplug the IG2 relay, connect 6 to the IG2 replay socket;
e.g. LEVIN by method1:
Method2: unplug the vehicle fuse, connect No.6 & No.8 by cable color, No.9 & No.10 are plugged into the corresponding fuse sockets(Choose according to the model);
e.g. REIZ by method 2:
Step 5. remove the positive cable of the vehicle from the positive terminal of the battery(note: don’t short-circuit the positive cable with the vehicle body!!!), clamp the positive terminal with No.7;
Read & Save Data File
Go to X300 DP Plus/ X300 Pro4 tablet, press
IMMO >> Asia >> TOYOTA LEXUS >> TOYOTA/LEXUS V32.45 >> Manual select system >> Blade >> Type 3(with H 8A/8E) >> Europe >> Read Immo data >> Enter
Note: please ensure the internet connection is normal.
Connect P002 adapter, Toyota-1, or Toyota-2 cable according to the diagram, you can press “Instructions” to check, press “Enter” to continue.
Rename, enter >> Enter
Save data file success.
Make Start Key
Make start key >> Enter
1. This function can generate the Key Sim start key when all keys are lost.
2. Using the Key Sim start key can replace the original car master key for key programming operations.
3. The Key Sim start key must be kept charged before it can be used, and it needs to be regenerated after power failure.
Select data file, enter >> Enter >> Enter
Please connect Key Sim simulator.
1. The Key Sim start key is generated successfully.
(Note: Remove all the connections between the Toyota-2 cable and the vehicle, connect the positive cable of the vehicle to the positive terminal of the battery. Then proceed to next step.)
2. Place the indicator light of the Key Sim start key close to the ignition switch and insert the blade key without chip into the ignition switch, turn the blade key to start the vehicle.
3. If the vehicle can be started normally, please use the Key Sim start key and the blade key without a chip instead of the original vehicle master key for key addition and removal operations.
Press “Enter”.
Program Key
Program key >> Enter
1 master key is needed to erase or add other keys!
Insert programmed master key, switch ignition on, press “Enter”.
Insert the key to be programmed and keep the ignition off, press “Enter”.
Wait for 60s until the immobilizer lights turn off.
Done!
This is how to use Toyota-1 + Toyota-2, P002 Adapter, Key Sim working with X300 DP Plus/ X300 Pro4 to program a blade key for Toyota Levin 2017 all key lost.
https://www.obd2shop.co.uk/