OBDSTAR DC706 ECU Tool can support clone Mercedes-Benz GETRAG VGS2-FCVT/FDCT by bench mode. Besides it also supports ECU clone, TCM clone, body, and other clones for Bosch, Continental, GM, FCA, Ford, Siemens, Temic, PSA, etc. Read this article carefully to learn how easy to do.
OBDSTAR DC706 TCM Benz Support List
| Brand | ECU Brand | Type | Dump | Function | Connection Method |
| BENZ | GETRAG | VGS2-FDCT | TC1784 | Read & write eeprom/flash | BENCH |
| BENZ | GETRAG | VGS-FDCT | TC1766 | Read & write eeprom/flash | BENCH |
| BENZ | GETRAG | VGS2-FCVT | TC1766 | Read & write eeprom/flash | BENCH |
| BENZ | BOSCH | VGS NAG3(9G TRONIC) | Read & write eeprom/flash | BENCH |
Procedure
Accessories Required:
OBDSTAR DC706
Main cable
P004 ECU clone jumper
P004 adapter
BENZ VGS2-FCVT/FDCT Module
* Please keep OBDSTAR ECU Tool charging & communicating throughout the process.
Operation
ECU Flasher >> TCM >> Latest version >> Benz >> BENZ GETRAG VGS2-FCVT TC1766(BENCH)/ BENZ GETRAG VGS2-FDCT TC1784(BENCH)
To check wiring diagram or instructions, click “Guide” & “Pinout” on bottom.
After the harness connection is completed, click “Start >> Connect”.
Switch ignition off.
Turn on the ignition.
When it says: “The ECU is connected successfully, we can start to read & write eeprom and flash.
Video tutorial:
BENZ VGS2 FCVT TCM Read/Write by Bench using OBDSTAR DC706
ENZ VGS2 FDCT TCM Read/Write by Bench using OBDSTAR DC706
