How to Test 2013 Mercedes C220 EIS via Xtool A80 Pro?

How to use Xtool A80 Pro OBD2 Diagnostic Tool to test EIS functions on a Mercedes Benz C220? Here we go I’m gonna make a quick demo to show the steps.

Plugged A80 Pro VCI into OBD2 port, press

Mercedes >> Automatic detection >> OK >> System selection >> Body >> EZS – electronic ignition switch >> Live data

test-2013-mercedes-c220-eis-via-xtool-a80-pro-01

test-2013-mercedes-c220-eis-via-xtool-a80-pro-02

test-2013-mercedes-c220-eis-via-xtool-a80-pro-03

test-2013-mercedes-c220-eis-via-xtool-a80-pro-04

test-2013-mercedes-c220-eis-via-xtool-a80-pro-05

There are 7 system functions we can test, I’m going to show the status of the ignition switch, so press “Status of circuits”.

As you can see, the “Circuit 15C/15R” is my ignition, like ignition feeds, which are “OFF”.

My transmitter key is “Not Active”. My circuit 50 is my main feed. When my ignition is turned, it is also “OFF”. so what I’ll do is to insert the key.

Look, Circuit 15C has come on. I’m going to turn my ignition on, so my lights are on the dash. If you now notice my ignition switch on, signals are all activated. And the only one at the minute that’s off is my start signal.

So if I press my brake and try to start the vehicle…Have a look, the EIS is sending the signal out. So the vehicle started, it went to on then went off again. That means it sent the signal to the vehicle ECU and the relevant modules for the car to start.

test-2013-mercedes-c220-eis-via-xtool-a80-pro-06

test-2013-mercedes-c220-eis-via-xtool-a80-pro-07

test-2013-mercedes-c220-eis-via-xtool-a80-pro-08

test-2013-mercedes-c220-eis-via-xtool-a80-pro-09

test-2013-mercedes-c220-eis-via-xtool-a80-pro-10

This is just a quick way of testing Mercedes EIS to see its functionality via Xtool A80 Pro. Any questions please contact us.

https://www.obd2shop.co.uk/

 

About Sales OBD2shop.co.uk 2161 Articles
OBD2shop.co.uk specializes in manufacturing and exporting car & truck OBD OBD2 EOBD diagnostic tools to worldwide.