This post will guide you on how to use Yanhua Mini ACDP and its’ Module 32: K-line Module Clone to do an Audi 6HP gearbox clone.
Power on the ACDP
Open the ACDP app, and confirm in the upper right corner that the ACDP device is connected.
Click Module, click K-Line module clone, and click on the help of 6HP BOSCH(VAG)
Connect ACDP with the device correctly according to the help documentation, the overall connection diagram is shown in the figure.
Step 1. Identify
Click [6HP BOSCH(VAG)]>>[Identify]
Prompt: Please use the ACDP standard power adapter (voltage+ 12V, current >=2.5A).
Click “OK” to continue.
Prompt: Please connect ACDP with the gearbox
Click “Continue”.
Confirm the system information and save a screenshot.
Prompt: Identify chip info and finish
Click “OK” to continue.
Prompt: Operation log path:/storgae/emulated/0/yanhua_acdp/aliyun/Atmatch/module/MPC56x_6HP_BOSCH_CLONE/0001/202402190951 MPC56x_6HP_info.log
Click “OK” to continue.
Step 2. Full backup data
Click [Full backup data]
Prompt: Please use the ACDP standard power adapter (voltage+ 12V, current >=2.5A).
Click “OK” to continue.
Prompt: Please connect ACDP with the gearbox
Click “Continue”.
Confirm the system information and save a screenshot.
Click “Continue”.
Reading chip data, please wait…
Prompt: Please save chip data
Click “OK” to continue.
This is the storage path for the backup files, confirm the backup file name, then click “Save a file”.
Prompt: Backup file succeeded: /storage/emulated/0/yanhua_acdp_aliyun/ATmatch/module/MPC56x_6HP_BOSCH_CLONE/0003/202402190953 MPC56x_6HP_Full.bin
Click “OK” to continue.
Prompt: Backup chip data finish
Click “OK” to continue.
Prompt: Operation log path: /storgae/emulated/0/yanhua_acdp/aliyun/Atmatch/module/MPC56x_6HP_BOSCH_CLONE/0001/202402190954 MPC5x_6HP_RFull.log
Then we connect another 6HP gearbox, preparing to write the original files.
Step 3. Full write data
Prompt: Please use the ACDP standard power adapter (voltage+ 12V, current >=2.5A).
Click “OK” to continue.
Prompt: Please connect ACDP with the gearbox
Click “Continue”.
Confirm the system information and save a screenshot.
Prompt: Please select chip data
Select the backed-up original car data
Prompt: Ready to write chip data, please don’t cut the power nor pull out the device during the programming!
Click “Continue”.
Writing chip data, please wait…
Writing chip data successfully!
Video guides:
