Yanhua Mini ACDP with Module 22 can support GM 6TXX / 6LXX gearbox clone, this article will take GM 6L50 as an example to guide you on how to do it.
The accessories we need:
20 PIN Cable
OBP+ICP Adapter
ACDP Host
6LXX Interface Board
Connect the ACDP, OBP + ICP adapter, interface board and gearbox as the picture shows.
Open the Mini ACDP APP, choose “GM” → “Gearbox clone” → “GM 6L50”
Backup chip data
Choose “Full backup data”, and make sure the gearbox is connected with ACDP.
Confirm the system information and save the screenshot, click continue.
After the clip data has been read successfully, click “Save” in the lower right corner.
Write chip data
Choose “Full Write data”, and make sure the gearbox is connected with ACDP.
Confirm the system information and save the screenshot, click continue.
Select the original data file that saved in the previous step.
The device is about to write clip data, please make sure these two gearbox computers’ model are the same.
Writing chip data finished.
For more detailed steps, please refer to the video:
