The YANHUA MINI ACDP with the new Module 47 can duplicate 2018+ JLR keys without removing the RFA. The procedure uses an ID-changeable aftermarket/universal key and the BAV-KEY adapter.
Connect and Identify the Vehicle
1. Connect the MINI ACDP to the vehicle OBDII port and use the standard ACDP power adapter (12V, ≥2.5A). Turn on the ignition so the instrument cluster lights up.
2. Open the ACDP APP and confirm the programmer is bound. Go to JLR >> ICP+OBD Duplicate key without removing RFA(2018-) >> OBD Identify Car Info.
3. Verify the original vehicle information, save a screenshot, and click Continue. Confirm that UWB, PE, and PS are turned off and that the key supports copying.
Identify the Original and Universal Keys
1. Select BAV identify key info >> Help >> OK. Connect the BAV-KEY adapter to the MINI ACDP and place the sensing area of the original key correctly on the adapter.
2. Verify the original key ID and chip model. Confirm that it is an OEM key, save a screenshot, and continue until the key information is read.
3. Place the new key on the BAV-KEY adapter and select BAV identify key info. Click OK >> Continue, then confirm that the key is an ID-changeable universal key.
Read the Original Key Data
1. Disassemble the original key and select the correct option according to the chip marked on the key or identified by the system. For an NCF29A4V key, select ICP+OBD program key >> Step1. ICP read original key >> Help.
2. Connect the key to the interface board and MINI ACDP correctly. Click OK >> Continue and confirm the original key information.
3. Wait for the key data to be read, then click OK to save it. Confirm that the backup file is saved successfully.
Make the Dealer Key
1. Select Step2. Make dealer key >> OBD+BAV make universal key>>Help, read the precautions, and place the ID-changeable key on the BAV-KEY adapter.
2. Verify the original vehicle information, connect the MINI ACDP to the BAV-KEY adapter, and place the universal key correctly on it. Verify the key information, select the original key data, and confirm the identified IMMO information.
3. Select Lost Key Channel 1 for duplication. The grayed-out channel is reserved for the working key and cannot be selected. Click Continue and wait for Make dealer key to finish. Do not disconnect or unplug the equipment during programming.
UWB must be disabled for this cloning function. If UWB is enabled, the cloned key only supports remote control and emergency start; Comfort Access and Keyless Start are not supported.
Verification
Reassemble the original key, then check both the original and newly copied keys in the vehicle. Confirm that the vehicle starts and the basic key functions work normally.
Read also
Yanhua Module 47 Released: 2018+ JLR Duplicate Key Without Removing RFA
http://blog.obd2shop.co.uk/yanhua-module-47-released-2018-jlr-duplicate-key/
