How to use Xhorse VVDI Mini Key Tool&Autel MaxiIM IM608 to program a remote key for Hyundai Tuscon 2008? This time I’ll show the procedure step by step.
Tools
An original working key
A blank new key
Xhorse VVDI Mini Key Tool
Autel MaxiIM IM608
Steps
The separate outer shell, take out the chip of new key to connect with Mini Key Tool,
Press in Xhorse app:
Vehicle remote >> Hyundai >> Tucson >> Tucson 05-09 FSK 313 >> Generate
Generating remote…wait until 100%
Burn success, press “Complete”.
Insert original key to turn ignition on.
Connect Autel IM608 with OBD, press
IMMO >> Hyundai >> Manual selection >> Europe >> Tucson(JM) >> 2008 >> G 2.0 DOHC >> Yes
Hot functions >> Immo keys >> Transmitter code saving >> Code saving
1. Remove the ignition key from the key cylinder.
2. Press “OK”. Wait for 2s, and then press the LOCK button on the transmitter for over 1s.
The 1st transmitter is registered.
To check the status of the registered transmitters, close the vehicle communication, press LOCK or UNLOCK button of the remote key.
Press “Cancel” to finish.
Let me test the key now, its remote can work well.
Key programming has done!
Using VVDI Mini Key Tool + Autel IM608 Key Programmer to add a remote key for Hyundai Tuscon 2008 successfully.
