Solved: Super MB Pro M6 + SSD (749/701) Network Problem

Problem: Super MB Pro M6 + V2022.12 WIN10 SSD has met network problem, it gave the error as below:
“Initialisierung des Diagnose-Multiplexers ist fehlgeschlagen.
Mogliche Ursachen:
Die Verbindung zwischen dem Diagnose-Multiplexer und der Diagnosedose ist unterbrochen.
Die Verbindung zwischen dem Diagnose-Multiplexer und dem Diagnosegerat ist unterbrochen.
Die Spannungsversorgung an der Diagnosedose (Klemme 30 und (oder)Klemme 31) ist fehlerhaft.
Hinweis:
Bei Verwendung des SDconnect den Verbindungsstatus uber das Toolkit prufen”.

(Initialization of the diagnostic multiplexer is failed.
Possible causes:
The connection between the diagnostic multiplexer and the diagnostic socket is interrupted.
The connection between the diagnostic multiplexer and the diagnostic device is interrupted.
The power supply at the diagnostic socket(terminal 30 and (or) terminal 31) is faulty.
Notice:
The connection status when using the SDconnect check via the toolkit.)
solved-super-mb-pro-m6-ssd-749-701-network-problem-(1)

“Due to network problem, no connection to the SDconnect can be established(749)”.
“No VCI found.(701)
No SDconnect is selected or the desired SDconnect cannot be selected”.
solved-super-mb-pro-m6-ssd-749-701-network-problem-(2)

solved-super-mb-pro-m6-ssd-749-701-network-problem-(3)

Solution
MB Star Diagnostic Tool needs to revise IP when connecting via network. Please follow the steps below to fix the problem.

Selected “Use the following IP address(S)”
IP Address(I): 172.29.127.113
Subnet mask(U): 255.255.255.0
solved-super-mb-pro-m6-ssd-749-701-network-problem-(4)

Technical Support
www.obd2shop.co.uk

About Sales OBD2shop.co.uk 2221 Articles
OBD2shop.co.uk specializes in manufacturing and exporting car & truck OBD OBD2 EOBD diagnostic tools to worldwide.