OBDSTAR P003 KIT is new in stock. Supports to work with IMMO series X300 DP PLUS (Key Master DP Plus), X300 DP (Key Master DP), X300 PRO4 (Key Master 5) for BOSCH ECU data reading, CS, pin code reading. Covers Audi, Citroen, DS, Mahindra, Peugeot, Skoda, Seat, Volkswagen, etc.
NOTE: P003 KIT requires upgrading tablets to the latest version. Please ensure tablets invalid time.
What’s in OBDSTAR P003 KIT?
1. P003 Adapter
2. ECU Bench Cables
OBDSTAR P003 Supported ECU List:
BOSCH EDC17U01(TC1766), MED17.5(TC1766), MED17.5.1(TC1766), MED17.5.20(TC1766), MED17.5.5(TC1766), MED17.5.5 HW2(TC1766), EDC17C46(TC1767), ME17.5.6(TC1767), ME17.5.20(TC1767), MED17.5.2(TC1767), MED17.5.5(TC1767), MED17.5.5 HW2(TC1767), MED17.5.21(TC1782), MED17.5.25(TC1782), EDC17C54(TC1797), EDC17C64(TC1797), EDC17CP44(TC1797), EDC17CP44 MS(TC1797), ME17.1.1(TC1797), ME17.1.6(TC1797), MED17.1.1(TC1797), MED17.1.1 MS(TC1797), MED17.1.6(TC1797), MED17.4.4(TC1793), MD1CS018(Euro 6/TC298TP), MG1CS042(Euro 6/TC298TP), MG1CS003(Euro 6/TC298TP) etc.
How to Connect P003 KIT?
Tools In Need
1. Diag cable OBD connector(male)
2. Connect P003 connector(female)
3. P003 adapter
4. Boot jumper(spring needle)
5. Boot jumper(welding)
6. ECU pin connector
7. ECU boot connector
8. 12V power
Bench Mode Method
1. Connect(1, 2, 3) Diag cable OBD connector(male), P003 connector(female) & P003 adapter as image;
2. Follow the wiring diagram to connect ECU pin connector with ECU;
3. Power on OBDSTART diagnostic tool with 12V.
Now you’re allowed to start reading.
Boot Mode Method
1. Connect(1, 2, 3) Diag cable OBD connector(male), P003 connector(female) & P003 adapter as image;
2. Follow the wiring diagram to connect ECU pin connector with ECU;
3. Connect(7 with 4 or 5) ECU boot connector with boot jumper(spring needle) or boot jumper(welding), then connect to ECU;
4. Power on OBDSTART diagnostic tool with 12V.
Now you’re allowed to start reading.
