This post shows how to modify the DB15-LAN and PTCU adapters in ACDP-1 Module 19 to fit ACDP-2.
Prepare a cross screwdriver and diagonal pliers.
Use a phillips screwdriver to remove the screw on DB15-LAN and PTCU.
Disassemble the casing.
Use diagonal pliers to cut the protruding parts of the front ends of the two shells flat.
Install the processed housing back.
Tighten the screws.
DB15-LAN and PTCU shell processing completed.
Move the switch to the CUT end.
Video guides: