How to use Sdconnect C4 do Online SCN Coding?

What you can find here:

1. SCN coding compatible hardware SCN connect c4

2. How to use SCN connect c4 to do SCN coding

3. SCN coding importance

1. Question: can clone MB SD C4 support Mercedes online SCN coding?
The answer is yes. Newest MB SD C4 2019.03V / 2018.12 can perform online SCN coding perfectly as long as you have online software account or buy one-time SCN coding service.
mercedes-benz-2019-3-01
Image: MB SD C4

mercedes-benz-2019-3-02
Image: Xentry 2019.03V

Source of SCN coding account:
Source 1: MB Online SCN Coding / Online programming 1 Year Account
http://ad.ucobd.com/canon-eos-5d
$2,299

Source 2:
http://www.obd2shop.co.uk/wholesale/online-scn-coding.html
$85
One-time service
1. ) After ordering this service, prepare mb sd c4, car, laptop and teamviewer.
2.) Send Teamviewer ID and Password to customer service
3. ) The engineer will access to your laptop to authorize SCN coding function.
4. ) After finish, the system will display “The SCN coding sequence has been completed successfully”.
scn-service-03

2. SCN coding importance
The move to SCN coding was *very* important. There are too many configuration items in every ECU now to have someone set options by hand whenever an ECU is changed, or to understand how changes on one device have to be done on other devices. These cars are really very very complex, and unlike your laptop, if something goes wrong can result in fatalities.

There are software dependancies between different ECUs, and actually loading software into ECUs is now needed regularly – and thus so is up-to-date diagnosis equipment and up-to-date firmware disks too. A simple example is the Audio system. If you update the firmware in the COMAND unit the firmware in every other MOST device needs also to be compatible (if you want it to work reliably) and thus they all need firmware updates. If you change one component then all components need to be updated to be properly compatible.

The latest equipment even now uses ethernet to load firmware into some ECUs (so it takes 20 minutes not 20 hours).

Without SCN coding it would take considerably longer to change any control unit, would result in mistaken configurations, and thus the cost of repair (or re-repair) would go up and up as systems got more complicated. SCN coding basically allows the correct configuration to be loaded into the car.

Imagine what could/would happen if you had to “hand code” the airbag controller after replacing it ? Would you trust all of your airbags to work after the local mechanic had to set all the options correctly ? I certainly would not.

Your comment that “The capital cost of the latest version, plus the monthly subscription, means it is beyond the reach of many smaller independent garages” is just wrong.

If your garage has the skills to deal with the technology (and i’d argue that if they don’t they shouldn’t be doing complex things with the newest vehicles), then it is completely affordable.

If you want to work on older cars, then most independents seem to use a clone machine and use it for limited things.

The EU competition commissioner has previously taken a good look at this market and enforced rules that mean diagnosis equipment (for newer vehicles) is available at sensible prices. This is not true in the rest of the world. Mercedes diagnosis systems in USA are more expensive, and in the far east (and I think Australia) are not available at all to independents.

Sorry to be so contradictory, and in summary, but without SCN coding there would be mis-configurations and un-reliability – possibly dangerous to life – occurring quite regularly. And if you are going to need to work on newer cars, there are very affordable Xentry diagnostics systems – you just need to talk to Mercedes.

About Sales OBD2shop.co.uk 2158 Articles
OBD2shop.co.uk specializes in manufacturing and exporting car & truck OBD OBD2 EOBD diagnostic tools to worldwide.