The Original Xhorse IKeycutter CONDOR XC-MINI Master Key Cutting Machine come and new arrival Finally ! What a good news for us !
Today we’d like to share with you :
How to Installation Xhorse IKeycutter CONDOR XC-MINI Master Key Cutting Machine ?
Here is the detail steps :
1 Installing the cutter
To Install the cutter
1） Put the cutter into the cutter hole and to the top limit position, ensure the section of cutter
and clamp lateral parallel
2） Turn the CUTTER LOCK SCREW clockwise, till the cutter is tightened.
2 Removing the Cutter
To Remove the Cutter
1） Hold the cutter lightly, Turn the CUTTER LOCK SCREW counterclockwise
2） after the cutter loosen, remove it
3 Clamp installation
To Install the Clamp
1） Turn the LOCKING WRENCH counterclockwise on the left side to loosen.
2） Choose the clamp according to the key type, Push the clamp from the right side of the
CLAMP CARRIAGE to limit position
3） Turn the LOCKING WRENCH clockwise to tighten the clamp
3 Clamp Sampless
