Operational process for all key lost
Please confirm whether emulator key (SKE) is bound to K518 device beforehand.
Backup EEPROM data-> Generate new data-> Dismantle immo box and write new data to EEPROM-> Generate SKE-> Add/delete smart key
1. Backup original EEPROM immo data.
2. Use backup data to generate new data.
3. System certify and generate new data automatically, and program SKE to become an available key,which can open dashboard.,before key programming.
4. Add a smart key.
5. Delete programmed key.
6. Bind SKE: Require to bind all SKE to K518 for the first use.
Operation
Operational process for all key lost
Please confirm whether K518 is bound to emulator key (SKE).
1) Backup EEPROM data–> 2) Generate emulator key (SKE)–> 3) Use SKE to switch ignition ON–> 4) Add smart key
1. Operation
1) Backup EEPROM immo data.
2) Generate a SKE for emergency use.
3) Put the SKE close to start button and dashboard will be lit up.
4) Add a smart key.
5) Delete a smart key.
2. Bind emulator key
1) This function can bind emulator key (SKE-LT series) to K518 host.
2) Please insert key to be bound into the host slot.
3) System is binding… Program key when key binding complete.
3. Backup EEPROM data
1) This function can backup EEPROM data.
Generate SKE for emergency when data backup complete.
Insert SKE to switch ignition ON and open dashboard.
2) Receiving vehicle immo data… Please wait patiently.
3) Please name EEPROM backup data.
4) Data backup succeed.Please select “generate emulator key”function to generate a spare key for emergency.
4. Generate emulator key
1) This function can generate a spare master key when all keys are lost, which can open dashboard to add other keys.
2) Receiving local backup data…
3) System shows current data and notify key type.
4) Insert bound emulator key (corresponding color/type) into K518 host slot, and press round button on the key.
5) Generating SKE … Please wait for 5 minutes patiently.
6) When SKE is generated,press round button on it and put it against start button of vehicle, and try to open dashboard. If the dashboard is lit up, please use SKE to program and add new keys.
5. Add smart key
1) Put SKE or available key against ignition switch and switch ignition ON till dashboard is lit up.
2) System communication, getting info about key numbers…
3) Put registered smart key against vehicle start button, and remove it when buzzer beeps once.
4) Put smart key (to be registered) at start button of vehicle in 30 seconds, and remove it when buzzer beeps twice.
5) Please wait till key registration complete. Operation succeed.
6. Delete smart key
1) Put emulator key or available key close to ignition switch and switch ignition ON till dashboard is lit up.
2) System communication, getting info about key numbers…
3) Put back of registered smart key close to vehicle start button, and remove it when buzzer beeps once.
4) System is deleting key… Deleting succeed. Smart key (away from start button) will be deleted.
Attentions
1. Bind emulator key: Require to power on the device when put emulator key into K518 host slot.
Chip type | 94/D4(SKE black), 88/A8(SKE red), A9(SKE blue), 39(SKE orange) |
Remote control type | Specific smart key |
Key embryo No. | Specific smart key |
Password required or not | Not required. |
Remote control | Generate automatically when smart key programming complete. |
OBD position | Under steering wheel |
Reference pics | Smart key appearance for part of Toyota series
Toyota series: 2008 Reiz 0111 smart key Lexus smart key, select from PCB type: 89904-30291(0140 PCB ES350 old ver. ) |
Five Toyota/Lexus smart Key Emulator Comparison
Chip Model | Color | Status |
39(128 bit) | Orange | No need connection from server |
94/D4 | Black | |
98 | Green | |
A9 | Blue | On the way |
88/A8 | Red |
More info please refer to the link below:
http://www.obd2shop.co.uk/wholesale/lonsdor-orange-ske-lt-dstaes-128bit-emulator.html