BMW 6HP EGS refresh and clone (F chassis) can be realized by Yanhua Mini ACDP without removing and welding.
Images mean a lot:
8HP ISN clear (Support F /G chassis) and 6HP data refresh (Support F chassis)
6HP data refresh (Support F chassis)
Data refresh and Read/write data.
8HP ISN clear (Support F /G chassis)
Yanhua ACDP + module11 refresh 6HP data (Support F chassis)
1: wiring of adapters and Mini ACDP
Prepare ACDP, OBP+ICP adapter, EGS interface board and EGS module.
Connect the 6HP end of the EGS interface board to the EGS module interface.
Short the CAN termination resistor on the OBP+ICP adapter to the “CAN-R-Join” terminal.
Connect the ACDP, OBP+ICP adapter, EGS interface board and EGS module.
2: download Yanhua Mini ACDP software
Browse Yanhua ACDP official site http://www.acdpmaster.com/
Download pc software or Android / IOS APP.
Here take PC software for example, please download the two parts with red arrow.
Select “Mini ACDP”, Select “BMW”, then “EGS Refresh” , then “6HP data refresh (Support F chassis)”.
3. Yanhua Mini ACDP Loading source and quick to main menu, select “Data refresh”.
Check VIN and other information.
Reading data and save the data file.
Data refresh is completed.
Well done! Yanhua Mini ACDP.
BMW 6HP EGS data refresh function: needs programming and coding before assembling the module back to the car after refreshing; BMW 6HP read/write data function: writing the data to the new module which read from the old one, which known as clone so that assemble back to car directly.