Yanhua Mini ACDP updates one 8p clamp in the package without paying extra money. The long clip is easy to observe and prevents the embedded chip from shaking. The newly-added finger handle is easy to hold and keep balance.
How to install Yanhua Mini ACDP 8p clamp?
1. Install 8pin cable
2. Loosen the screw on the puncture socket.
3. Hold the new puncture socket.
4. Check the direction of puncture socket and chip.
5. Press down the puncture socket until it fully connects with the PCB board.
6. Press down the puncture socket and tighten the screw on the puncture socket.
7. The FEM/BDC PCB board can be lifted up after the puncture socket is completely installed.
The airbag module PCB board can be lifted up after the puncture socket is completely installed.
The odometer PCB board can be lifted up after the puncture socket is completely installed.
Look at the 8p clamp photos taken from various angles:
Yanhua Mini ACDP tech support is offered by www.obd2shop.co.uk
