Xhorse Key Tool Max + Obdstar X300 DP Plus Add 2017 Nissan Navara Key | OBD2shop.co.uk Official Blog Xhorse Key Tool Max + Obdstar X300 DP Plus Add 2017 Nissan Navara Key

Today we’ve got to program a new key for Nissan Navara 2017 with Xhorse VVDI Key Tool MAX&OBDSTAR X300 DP PLUS key programmers. The procedure includes generating remote & program key, also apply to 2018 or latest models.

To start, we’ll need a working key & universal remote key.

Generate Remote
First of all, we should determine the chip of working key.
It turns out to be a transponder ID46 chip.

Put the new key into VVDI Key Tool MAX slot,
Vehicle remote >> Nissan >> Nissan ID46 13-17 Micra 2383 >> Generate remote
Burn success.

Note: If this doesn’t work or it’s the wrong generation, it’s not a problem. We can regenerate it again and try it again as a different generation with ID46.

Program Key via OBD
Connect Obdstar Key Master DP Plus into OBD2 port.
It’s above the brake pedal. Go to
IMMO >> Asia >> NISSAN INFINITI >> NISSAN/INFINITI V32.13 >> Manual select model >> NISSAN >> NAVARA >> EUROPE >> 2017- >> PROXIMITY >> Program smart key

This function will erase all keys, press “ENTER” to continue.
Take all smart keys out of the car, and press START button.
Open driver door, then close the door.
BCM code & pin codes were read out.

Put the back of new key on START button, press START button. Wait for security light extinguished, press ENTER to continue.

Switch ignition off.
Program success.

We can press ENTER to go on programming next key.
If all keys are programmed, press Cancel.

Attach the back of programmed key to the START button to start vehicle.
(If vehicle cannot be started, please re-execute this function and try another starting method: depress brake & press start button twice with programmed key to start vehicle.)

Switch ignition off.
Open driver door, then close the door.
Press UNLOCK button of the key.
Programming complete.

Test the keys, both can work perfectly.
Done.