This is a real story, I have used Xhorse Micronas OBD tool for Volkswagen for some time and today i wanna share some experience of it with you all here.
FOR SHARING ONLY!
I have to say VAG Micronas OBD tool is easy to use diagnostic and adjustment tool for Volkswagen and Skoda cars from year 2006.06, provides odometer correction, EEPROM read/write…
Micronas OBD tool version:
firmware to V2.0.5
Language:
English,Spanish and Chinese.
Operating system:
Windows XP, and Windows 7
Abilities:
– do mileage correction for VW cars (after 2006.06) by obd2.
– read pin code for VW cars (after 2006.06) by obd2.
– EEPROM read/write for VW cars (after 2006.06) by obd2.
Models supported:
Golf, Golf+ from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):
Odometer correction, PIN code read, EEPROM read/write
Passat B6 from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):
EEPROM read/write
Bora, Jetta from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):
Odometer correction, PIN code read, EEPROM read/write
Touran from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):
Odometer correction, PIN code read, EEPROM read/write
Caddy from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):
Odometer correction, PIN code read, EEPROM read/write
Tiguan, Eos from year 2008+:
Odometer correction, PIN code read, EEPROM read/write
Octavia (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):
Odometer correction, PIN code read, EEPROM
What you need:
-A computer;
Laptop, desktop, Car PC whatever floats your boat. (Linux, Windows)
-A Vag obdii diagnostic adapter
-workable software from http://www.xhorseshop.com/
-Subaru cars
What adapter works?:
source: http://www.obd2shop.co.uk/wholesale/micronas-obd-tool-cdc32xx-v11-for-volkswagen-1187.html
Here, I would show you how to make car keys with Tango supported by CDC32 reader
1 use CDC32 reader to read Tango_flash and eeprom of this instrument
2 connect Tango device to the computer and put TP32 into tango device. and choose key maker type. load the flash and eeprom to get the key status
then find the car has 3 keys
first explore key
it is not recognized by immo data
then make key and save the new eeprom
here must keep the TP23 chipset fixed stability. otherwise, it would not write ok
load the new eeprom and tango_flash to explore key
3 use CDC32 reader to write the new eeprom into car
this 0x48 bytes cannot write into the eeprom because it is protected and not used about the key maker
finally the key can run the car….
