How to cut keys with Condor XC MINI master

There are 2 methods to cut keys by biting, using Condor XC MINI key cutting machine: one is to cut with the original key and the other without the original.

Method 1:without the origin key using Cut by Bitting

go to the main interface of the condor key cutting machine for cut by betting

use-xhorse-mini-cutting-keys-steps-1

select the blank key and key types to continue

use-xhorse-mini-cutting-keys-steps-2

use-xhorse-mini-cutting-keys-steps-3

Put the blank key in the properly position of the clamp display on the screen

then enter biting and verify, to start to cut

use-xhorse-mini-cutting-keys-steps-4

 

Method 2:existing the origin key using Cut by Bitting

select the blank key and key type

use-xhorse-mini-cutting-keys-steps-5

use-xhorse-mini-cutting-keys-steps-6

decode the key to find out the biting

use-xhorse-mini-cutting-keys-steps-7

Verify biting and modify biting if needed, then start to cut

use-xhorse-mini-cutting-keys-steps-8

key cutting success!!

(Visited 86 times, 1 visits today)