The successful renewal of the BMW 868 MHz remote with OBDSTAR X300 DP Plus has been proven.
How to do it? Let’s take a look.
The following tools are required:
X300 DP Plus Pad
X300 DP Plus Main Wire
C001 interface board
W001 cable
P001 Programmer
GODIAG Test Platform for BMW CAS4/CAS4+
BMW 868 MHz remote
Step 1. Insert the BMW remote into the GODIAG test platform card slot, click “CAR IMMO”, select the model “BMW” → “CAS4 / CAS4 +”, and select “Key Detect”, then you can see the relevant information of the remote.
Step 2. Click “Esc” to return to the main interface, select “RFID” → “Renew Key” → “BMW” → “F Chassis” → “868 MHz” → “IN-Circuit HUF5661”.
Please connect the wire correctly according to the wiring.
When the connection is complete, click “Enter” to continue.
Writing data, please wait…
Data scrubbing is successful!
For more detailed steps, please refer to the video below:
