Hyundai Accent 2020 is supported to add new smart key using Obdstar X300 DP Plus via OBD successfully. This is a quick guide to the programming procedure.
Plug X300 DP Plus connector into OBD, press
IMMO >> Hyundai >> Select from type >> Smart key system >> Type 7(without card slot CAN) >> Program smart keys
Press START button, press ENTER to continue.
Switch ignition off.
Input the pincode, and confirm value.
Please complete the following operations within 5s.
After confirming, press ENTER.
Within 5s to put smart key vertically close to the START button, and press START button.
Press ENTER to program next one, press ESC to complete.
Check the new key, its remote is good, and it can start the car.
Key adding has done!
Use Obdstar Key Master DP Plus to program a Hyundai Accent 2020 smart key is successful.