How to use CGDI programmer to Copy BMW CAS3+ key with working key

CAS3+ Copy key with key-7

This article will guide you to Copy BMW CAS3+ key with the working key by using CGDI Prog BMW MSV80.

Here is the Procedure:

Step 1. OBD connects vehicle, Click on the “BMW OBD KEY MATCH”

CAS3+ Copy key with key-1

Step 2. Click “Read key info”

CAS3+ Copy key with key-2

Step 3. Please pop up the key from the ignition, the data was read successfully.

CAS3+ Copy key with key-3

Step 4. Save the file

CAS3+ Copy key with key-4

Step 5. Select the key to match and click to generate the dealer key

CAS3+ Copy key with key-5

Step 6. Put the working key into the CG-DI programmer coil

CAS3+ Copy key with key-6

CAS3+ Copy key with key-7

The work key is being read

CAS3+ Copy key with key-8

Step 7. Please put the blank key into the CG-DI programmer coil

CAS3+ Copy key with key-9

We choose to match the ordinary key, click ” no ”
Note: If the key is a smart key, it will be locked

CAS3+ Copy key with key-10

Step 8. Please wait until the key is programmed

CAS3+ Copy key with key-11

Key matching success

CAS3+ Copy key with key-12

After learning, it can be used normally

CAS3+ Copy key with key-13

www.obd2shop.co.uk

(Visited 23 times, 1 visits today)