How to fix Lonsdor KH100 “Unable to connect to the network” and “Stuck in some interface” error

When “Unable to connect to the network” and “Stuck in some interface” problems occur while using Lonsdor KH100, how to solve it? Please continue reading to find out the answer.

Error 1: Cannot connect to the network even if there are several hot spots available.
Error 2: Stuck in some interface for a long time while operating.
For example, when you register the device, it just keeps searching for network.
When you turn on the device, it keeps loading for several minutes.

Solutions:
Step 1: Download the repaired file of KH100 and put the file on the desktop of a computer.
Unzip the file and you will get two files.

lonsdor-kh100-01

Step 2: Turn off the device. Hold the “Down” button for a few seconds and then press the “Power” button once, the device will enter the “USB Disk Mode” interface.

lonsdor-kh100-02

lonsdor-kh100-03

Step 3: Connect the device to the computer and put those two files into the device.
Step 4: Click “OK” to reboot the device and you will see a progress bar in the device. The device will be updated automatically.

lonsdor-kh100-04

Step 5: Check whether the device works or not after updating.

www.obd2shop.co.uk

About Sales OBD2shop.co.uk 1649 Articles
OBD2shop.co.uk specializes in manufacturing and exporting car & truck OBD OBD2 EOBD diagnostic tools to worldwide.