Launch X431 launched EV Diagnostic Upgrade Kit, which includes an activation card and 15 diagnostic adapter cables.
And this post will show you how to activate the new energy battery pack diagnostic configuration of Launch X431 PAD V/X431 PAD VII (Currently only these two devices are supported).
There are two methods to activate it on the diagnostic scanner:
Method 1 – Via Job M
1. Update the main diagnostic app of the diagnostic scanner to V7.03.025 (X-431 PAD V) / V7.00.021 (X-431 PAD VII) or above and a new module “New Energy Diagnose” will appear on the Job menu. Refer to Figure 1.
2. Tap New Energy Diagnose to enter the following screen.
*Note: Vehicle Diagnosis in Figure 2 covers all new energy vehicle diagnostic software included in the original product configuration. See Figure 3.
3. Tap Battery Pack Detection, the system will identify whether the current user account has activated the battery pack diagnostic configuration or not.
A. If not activated, it will navigate to the Mall module directly. See Figure 4.
Tap Subscription Renewal Card Pay and enter the 24-digit password to activate it.
After it is successfully activated, please go to Software Update to download and install the diagnostic software for the battery pack.
B. If already activated but not downloaded the battery pack diagnostic software, it will go to Software Update to download. See Figure 5.
C. If already activated and downloaded the battery pack diagnostic software, it will enter the battery pack brand selection screen. See Figure 6.
Method 2 – Via Mall
1. Update the main diagnostic app of the diagnostic scanner to V7.03.025 or above and tap Mall on the Job menu. See Figure 7.
2. Tap Other Software Packages, and then tap New Energy battery pack diagnostic software package to enter Figure 8.
3. Tap Subscription Renewal Card Pay to enter Figure 9.
4. Tap Subscription Renewal Card Pay, enter the 24-digit password, and tap Confirm to activate it. See Figures 10 & 11.
5. After it is successfully activated, please go to Software Update to download and install the diagnostic software of the battery pack.
6. After downloading is completed, tap New Energy Diagnose and then tap Battery Pack Detection. The system will enter the battery pack brand selection screen. See Figure 6.
*Note: All illustrations and descriptions in this operation instruction are based on the latest information available at the time of publication. Due to continuing improvements, the actual product may differ slightly from the product described herein.
Technical support:
https://www.obd2shop.co.uk/
