This post will guide you on how to use the Yanhua ACDP and Yanhua Mercedes-Benz HU6 YH-OBD Platform to do Benz HU6 ODO Module (IC177) Mileage Correction.
Procedure:
Remove the Benz HU6 instrument module from the car.
Power on the ACDP.
Open ACDP APP.
Confirm in the upper right corner that the ACDP device has been bound
Click [Benz] >> [HU6 ODO Module (IC177) mileage correction] >> [R7F701403(A167/A213/A247)] >> [OBD+ICP reset mileage] >> [Original module (YH platform)].
Step 1: OBD backup data
We can click “Help” to learn how to properly connect ACDP to the Benz HU6 module.
Align the interface board with the instrument interface install it, and push the interface board switch toward the CAN-R.
Click “Step 1: OBD backup data”。
Follow the prompts, then check the Total drive mileage and Drive mileage.
Note: VIN and EZS hardware numbers won’t show when using the YH OBD platform.
Please save coding data.
Pay attention to the path, date, time, and file name of the file backup.
Click ok, same maintenance data.
OBD backup data finish.
Dismantle the Benz instrument module.
Take out the instrument panel.
Step 2: ICP modify data
Click on the “Help” in Step 2 to learn how to properly connect the ACDP to the device.
Click “Step 2: ICP modify data”.
Follow the prompts, then verify the system info.
Save the chip data.
Writing chip data, please wait…
Modify odometer data finish.
Step 3: OBD modify mileage
We can click “Help” to learn how to properly connect ACDP to the Benz HU6 module.
Click “Step 3: OBD modify mileage”.
Follow the prompts, then check the Total drive mileage and Drive mileage to see if they have been reset to zero.
Click ok to select coding data.
According to the data and time, select the coding data ending with “Coding”.
Click on the mileage number and enter the mileage number, click to continue.
Check the repaired mileage data.
Install the Benz HU6 instrument module into the car, and check if the mileage displayed on the instrument panel is normal.
