Using OBDSTAR X300 DP PLUS can program 2020 Honda Avancier all keys lost by OBD, which can save a lot of money from replacing a new IMMO box. Follow the tutorial to learn how to do it.
Tools Required
Key Master DP Plus
Main cable
Universal Remote Key
Video Guides:
Procedure
Connect X300 DP PLUS to OBD via the main cable.
We can see the IMMO indicator is on.
Car IMMO >> Honda Acura >> Latest version >> Honda >> Manual select model >> Asia >> Avancier >> Proximity >> Button >> Type 2(2019-)
Double click the Start button, ignition is still off, click “Esc”.
(If the ignition is on, please click “Enter”.)
Press and hold the Start button until the ignition is on.
The ignition is turned on, please release the engine Start/Stop button.
Smart key >> All smart keys lost
Programming conditions
1. No fault codes.
2. Make sure you have all proximity keys to be programmed.
Make sure the following matters, in order to minimize the noise source when programming the proximity key.
Turn off the switch, such as a navigation system and audio.
Keep the proximity key and the diagnostic tool separately by approximately 1m(3 feet). Close all windows, sunroofs and doors.
Click “Enter”.
This function will erase all keys, click “Enter”.
Turn off the ignition.
(Press the engine Start/Stop button. Be careful not to depress the brake.)
Place a new key to be programmed in the vehicle. Click “Enter”.
Double-click the Start button, ignition is still off, click “Esc”.
Press and hold the Start button until the ignition on.
The ignition is turned on, please release the engine Start/Stop button.
Is it a new model(2020 or later)? Click “Enter”.
This function is available by connecting the server, please ensure the Internet connection is normal.
Input numbers of smart keys to be registered.
Take out all the registered proximity keys from the vehicle (make sure they are 2 meters away from the vehicle).
Only take 1 new smart key into the vehicle within 100s.
Turn off the ignition.
(Press the engine Start/Stop button. Be careful not to depress the brake.)
Please take this proximity key to be programmed out of the vehicle.
Place the first programmed key back into the vehicle.
Turn on the ignition.
(Press the engine Start/Stop button twice. Be careful not to depress the brake.)
Take out all the registered proximity keys from the vehicle(make sure they are 2 meters away from the vehicle.)
Only take 2 new smart key into the vehicle within 100s.
The smart key has properly been registered.
Turn off the ignition.
(Press the engine Start/Stop button. Be careful not to depress the brake.)
Turn on the ignition.
(Press the engine Start/Stop button twice. Be careful not to depress the brake.)
IMMO indicator is off, click “Enter”.
Turn off the ignition.
(Press the engine Start/Stop button. Be careful not to depress the brake.)
Turn on the ignition.
(Press the engine Start/Stop button twice. Be careful not to depress the brake.)
Registration has been completed.
Turn off the ignition.
(Press the engine Start/Stop button. Be careful not no depress the brake.)
Turn on the ignition.
(Press the engine Start/Stop button twice. Be careful not to depress the brake.)
Click “Key quantity” to check.
2 keys are registered in the ECM/PCM.
Test the keys, both can work well.
Done.
This is how to program 2020 Honda Avancier all keys lost with Obdstar X300 DP PAD2.
www.obd2shop.co.uk