(Guide) Xhorse Mini Condor Cut Honda Acura HON66

Here is another Honda Acura HON66 key cutting guide by using Condor XC-MINI Key Cutting Machine. It will totally cost you only 5 minutes to cut a Honda HON66 new key. Clear and easy to operate!

Step1. Click “Cut by Bitting”.

xc-mini-cut-hon66-1

Enter “HON66” to select key.

xc-mini-cut-hon66-2

Select key type.

xc-mini-cut-hon66-3

Step2. Use M2 clamp and put side A upwards according to screen diagram. Tighten the clamp.

xc-mini-cut-hon66-4

xc-mini-cut-hon66-5

Put and tighten the original Honda HON66 key on clamp.

xc-mini-cut-hon66-6

Step3. Click “Key Decode” then click “Confirm”. Now Condor XC-MINI starts to decode the original key.

xc-mini-cut-hon66-7

After that remove the original key and put the new key blade on clamp to tighten.

xc-mini-cut-hon66-8

Step4. Click “Correcting& Cut” to start key duplicating.

xc-mini-cut-hon66-9

Wait a while then one side of Honda HON66 is finished. Use the brush to clean up key blade.

Turn the other side upwards and tighten key blade on clamp. Click “Correcting& Cut” to complete key cutting.

Done ! Hope it would help you!

(Visited 68 times, 1 visits today)