Lonsdor K518ISE key programmer register procedure:
After system updating, you need go to registration&activation.
For new user,
Click on Registration,
Input: user name(email), name(min 2 char), password(min 6 char), email verification code
Click on YES
(if interrupted after registration is done, you will go to the System update–Registered user to proceed).
Then go to Activation confirmation to continue.
Lonsdor K518ISE key programmer activate procedure:
After confirming activation, it will go the password Setup interface
set 6-digit numbers as your startup password
information verification by Lonsdor
(5-30 minutes, you can check the progress by clicking “Refresh” )
re-enter the password to verify
get the notification that verification successful
the whole process before using the device is complete.
1. User name must be working email address, so that you can receive the verification code from Lonsdor by email.
2. Please bear in mind the difference between the registration password (min 6 char) and the startup password(6-digit), the former will generally only used when registration, so please commit the 6-digit startup password into memory, as this will be required every time when you start the device.
3. The account will be bound to the corresponding device for life, other accounts can not log in your device and your account can not log in an registered or activated device either. 4. An account can be used to bind multiple new devices.
Lonsdor K518ISE Key Programmer Update
enable the network connection
the Lonsdor K518ISE key programming software system will automatically update to the latest version.
3 optional ways of system update:
One key update: quickly update the new added or modified functions.
APK update: this is used when the APK is updated.
Force to update: this is used when the device is faulty or to retrieve data.