I would like to read and modify an Alfa Romeo 159 1.9 JTDM 150 EDC16C39, also Opel Vectra (the same ECU as I know EDC16C39). My question is that which tool I need to use to read and write?
Car model: Alfa Romeo 159 1.9 JTDM 150 EDC16C39, also Opel Vectra (the same ECU as I know EDC16C39).
Purpose: read and modify the ECU data.
ECU programmer to use:
Option 1: Kess V2 master
Yes, read time 45 minutes… With Kline; for Vectra it is ok too, but 10 times faster.
Tips: If you are not sure if your tool will work as it should, then it is better to read first FULL BACKUP by BDM and then you can experiment with OBD, so if something goes wrong you can still save the ECU and a lot of nerves and time.
Option 2: BDM100
Reading takes less than a minute and also writing.
Good luck!
