Today I’m working on a Peugeot 208 (2013-), and I’m going to use the Xhorse VVDI Key Tool Max to clone a transponder for this car.
Put a working key into Key Tool Max coil slot, press
Transponder clone >> Read transponder
Information was read out, the specific chip is PCF7941.
Clone >> Start clone >> 46 transponder clone >> Original key clone (recommend)
It is sniffing data now, hold Key Tool Max close to the ignition for data collecting…
Do not remove the original key from coil slot.
Take out original key, and put a VVDI Super Chip into coil slot.
It is very simple to use VVDI Key Tool Max programmer to clone a key for Peugeot 208. It only takes me 2 minutes to be done.