VW Polo 6R SRS Airbag Light Reset via Autel MK808

There is an air bag warning light on the dashboard of VW Polo 6R. So I’m gonna use Autel MaxiCOM MK808 scan tool to diagnose what are the reasons caused.

Connect Autel MK808 with OBD2 port, press
Diagnostics >> Volkswagen >> System selection >> 6R – Polo >> Control unit >> Airbag 15 >> Trouble codes
vw-polo-6r-srs-airbag-light-reset-via-autel-mk808 (1)

vw-polo-6r-srs-airbag-light-reset-via-autel-mk808 (2)

vw-polo-6r-srs-airbag-light-reset-via-autel-mk808 (3)

vw-polo-6r-srs-airbag-light-reset-via-autel-mk808 (4)

vw-polo-6r-srs-airbag-light-reset-via-autel-mk808 (5)

vw-polo-6r-srs-airbag-light-reset-via-autel-mk808 (6)

vw-polo-6r-srs-airbag-light-reset-via-autel-mk808 (7)

As you can see, there are 3 fault codes here on screen: 1 of them seems to relate to the airbag.
B100A1B – Active/static – Front passenger side airbag igniter. Resistance too high.

So what I should do now is to unclip a connection underneath the passenger seat.

Okay, here we go, the airbag light is still on dashboard, let’s go to clear fault codes first.
Press “Clear DTC”.
vw-polo-6r-srs-airbag-light-reset-via-autel-mk808 (8)

Ignition on and engine off? Yes

DTCs and freeze data will be deleted.
Press “Yes” to continue.

No fault codes detected.
Press “OK” to finish.

Meanwhile, the airbag light has gone!
vw-polo-6r-srs-airbag-light-reset-via-autel-mk808 (9)

vw-polo-6r-srs-airbag-light-reset-via-autel-mk808 (10)

vw-polo-6r-srs-airbag-light-reset-via-autel-mk808 (11)

Assuming that we’ve found the fault codes, and we actually fixed the problems such as changing sensor or wiring, then we can come back into the vehicle with Autel MK808 Diagnostic Tool to clear trouble codes.

Thus, we’ll get rid of the warning light.
https://www.obd2shop.co.uk/

 

About Sales OBD2shop.co.uk 1672 Articles
OBD2shop.co.uk specializes in manufacturing and exporting car & truck OBD OBD2 EOBD diagnostic tools to worldwide.