Toyota Steering Angle Sensor Repair Via OBDSTAR P50

This post will guide you on how to use the OBDSTAR P50 Airbag Reset Tool to do a Toyota steering angle sensor repair by bench.

Tools we need:
OBDSTAR P50
Main Cable
P004 Jumper
P004 Adapter
Toyota Steering Angle 89245-12040

toyota-steering-angle-sensor-repair-via-p50-1

Procedure:

Tap [Airbag Reset]
Select the correct menu based on the mark of the module.
Click [Guide] at the bottom left to check the best connection method.

toyota-steering-angle-sensor-repair-via-p50-2

toyota-steering-angle-sensor-repair-via-p50-3

toyota-steering-angle-sensor-repair-via-p50-4

toyota-steering-angle-sensor-repair-via-p50-5

Click [Back] at the bottom right, then click [Pinout] at the bottom left to check the diagram.
Then we connect the harness according to the wiring diagram.

Turn on the power of P004 and connect to ECU.

toyota-steering-angle-sensor-repair-via-p50-6

toyota-steering-angle-sensor-repair-via-p50-7
After the connection is successful, you can find that there are collision data records in the module data.

toyota-steering-angle-sensor-repair-via-p50-8

Click the [Erase Crash] button, now you need to calibrate the angle back to zero degrees.

toyota-steering-angle-sensor-repair-via-p50-9

toyota-steering-angle-sensor-repair-via-p50-10

toyota-steering-angle-sensor-repair-via-p50-11

At zero degrees, it will show a green.

toyota-steering-angle-sensor-repair-via-p50-12

Once the calibration is complete, we can fix it with a tie to prevent deviation.
When loading, make sure that the steering wheel is centered and key off before installing the angle sensor.

For more details, please refer to the video below:

www.obd2shop.co.uk

About Sales OBD2shop.co.uk 2260 Articles
OBD2shop.co.uk specializes in manufacturing and exporting car & truck OBD OBD2 EOBD diagnostic tools to worldwide.