Hey guys, today I’m going to use Autel MaxiIM IM608 scan tool to program a new key and retrieve pin code for 2001 Dodge Neon all key lost. I will use 2 keys for the procedure, one is blade key, the other gray one does have transponder(with chip).
Here we go to AutelIM608:
IMMO >> Accept >> Dodge >> Manual selection >> North American >> Neon
2000-2006 blade key >> Read immobilizer password(VPW) >> Turn the ignition on, press “OK”.
Switch the ignition OFF and then ON again, make sure the engine is off.
Press “Operate Guide”, you will find the car coverage supported, Autel IM608 tool is quite amazing, just unbelievable.
Now exit to press “OK” to go on.
Remove key from ignition, and then switch the ignition with a non-chipped key. Press “OK”.
Switch on ignition with an unprogrammed key(with chip), press “OK”.
What I gonna do first is to switch it off, and hold the 2 keys both. I’m gonna open the switch at the same time. It is on, I’ll be holding the keys against the switch. Wait for the pin code to appear on the screen… It may take up to 1-3 minutes
The pin code has came out, record it and press “OK”.
Press “Immobilizer(VPW)”. Turn the ignition on, press “OK”.
Press “Key learning”. Turn the ignition on, press “OK”.
Oh, it puts the password automatically, press “OK”.
The password is correct, press “OK”.
Learning successful. Press “No” to finish.
So now I’m gonna test the key, I close the switch and open it, the car is on.
Key programming is successful!
This is how to program a new key and retrieve pin code for 2001 Dodge Neon all key lost with Autel IM608 Key Programmer. I am really happy for the money spent on this tool, it is really really worth it. Buy it, I will recommend you.