Put together the objective reviews on new xprog 6.12 from china. Anyone who are interested in this topic, just go on reading.
Xprog 6.12 Review 1.
Check xprog 6.12 free download and setup on win xp / 7 / 8
http://blog.obd2shop.co.uk/xprog-v6-12-free-download-setup-on-winxp-7-8-full-chip-list/
all opened authorization work fine.
everything that is open in authorizations is supported.
Screen from version 6.12 of the kit:
Xprog 6.12 Review 2.
work perfect
today
cas 3 read ok
jcb tacho HC908LJ12 ok
Colt airbag hc12d64 ok
Xprog 6.12 Review 3.
I work on that 6.12 for two weeks. It doesn’t work on VM, but I installed in on 64bit Win 10, works properly, but this chinese adobe is not working. Still, Xprog is working like a charm, the only drawback is that I had to copy the connection diagrams and rename the files to have easy access, as without adobe there is no diagrams within the software.
So if opening pdfs manually is not a problem to You, than it’s a good tool.
I’ve been using for a couple of months now and so far no problems works great.
It was working pretty well, but one day it died. I don’t know why, I connected it to USB port with internet disconnected, but it was not recognized, tried different USB cables, no response, tried RS232 port, not working. but it was pretty useful for almost half a year, and it definitely paid itself.
But really, for now I really recommend the ORI from Darius. Got one, as this was the third clone I hade, no more problems, no need to disconnect the internet, and the price is not that expensive really. Three clones are practically basic set of Xprog. It’s worth the money.
Xprog 6.12 Review 4.
Seen on Xprog 6.12 alone, this flies the certificate, as on the 584 version.
Editing epromprom solves the problem, but the dongle is connected with both software and FT232RL and if one thing is screwed up, then the repair will obviously not be cheap
Stick the proger and then the dongle and you will see the communication between them. Change RL and write down your crap with your native one and you will understand what I’m talking about. each RL has its id number
Xprog 6.12 Review 4.
I tested the xprog for a couple of days. In principle, it works, but slowly. Compared to J-Link and Renesas Flash Programmer. I also checked with mochi. With HC11E9 in the security board. 908AZ60 in the new adapter. 9S12DG128 from GBO Landirenzo, as a security guard. Broke off with 9S12XEQ384. When reading reports that there is a defense. Offers to erase or remove protection. When removing protection, it costs different times on the bypass of the security and falls out in the communication of terror. It didn’t work out for me, in general … There is still motya XEP100, but there is generally sadness – it does not see BDM. Most likely not alive. Renesas reads writes R7F701xxx. SPC56AP54 turned up on the non-CPC – also all in a bundle. Yeprom did not check, because muveton . You can take it. I did not understand the installation of software. So much “no way.” that you can go crazy. I have an autoprogram folder on drive D. Avast was told not to look in her direction. I dumped a folder with software into it. I started the regfile. I put the dongle and the progger into USB itself. Launched a program. I tried to call the help … Reinstalled reader 11. In the course there was 10. The Internet did not disconnect. It works so far. Does it make sense to make a copy of the FT232? In the user of an aria is what? I myself look, just now I remembered about its existence.
Dealt with the mots 9S12XEQ384 and 9S12XEP768. He got the last one today in MT22.1. She also did not want to break up. He lifted all his legs and it worked. After calculating that it was enough to raise only the reset. The first one was more interesting. I removed quartz from it. But in fact, it was necessary to remove the capacitor to ground. I would never have thought that he would be so hurt. You need to look at why the small amplitude at the outlet of the adapter. I do not like it. Moody technique – I want to work, I want to not work. Well, in general, actually all! Progger test passed!
Xprog 6.12 Review 5.
I bought myself a hprog 6.12. Not afraid of the Internet. It is not necessary to keep it on the desktop. I put it in the “Program Files” folder and sent a shortcut to the desktop. The program works. I read to them its industry sites 95020, 24s64 and 9S12DP512, which is in the Vagov tape recorder. I did not read the script from this chip, but I read both the flash and its industry. The sleeping KIA Sorento airbag unit with the MAC7242 processor did not succumb. I do not know why.
The programmer itself is made very high quality, complete with all the adapters from the old igroskog and one adapter with rounded corners from the already new version. A disk with a program, a jitag loop, a power adapter and very good quality usb lace.
All credits to the real users.
Xprog 6.12 good source:
https://www.obd2shop.co.uk/wholesale/latest-x-prog-m-ecu-programmer-with-usb-dongle.html
