How to Use Digimaster3 Change Mileage On Toyota Camry

Yanhua Digimaster3 Odometer correction tool as we know it has 2 ways change mileage , by Obd2 way and by Dashboard way. If vehicles can not change mileage via OBD2 way , we need do it via Dashboard way

Here share the example about Digimaster3 Change Mileage On Toyota Camry


1.Firstly open “digimastar3 vehicle list” file and search Camry, as shown bellow, OBP adapter needed, then find out the OBP adapter in the tool box. Open digimaster3, choose “Meter System” in the menu list.



2.Select Japan & Korea


3.Select Toyota


4.Select Camry


5.Display C46 as follows, which indicates to remove the Instrument and to find C46 chip. Note: the same as to the other cars models, when it displays chip model, just to remove the Instrument and find the corresponding chip model.


6.The following picture tells the location of dip 93c46, now remove dip 93c46.
Note: be careful not separate chip angle and no short-circuit.


The removed 93c46 chip like this.


Weld the chip in the right location as bellow and connect the OBP adapter with Digimaster 3, (Note: notice 93C46 direction)


In the Digimaster III, click Next, read out Chip mileage value 80KM, select “Yes” to adjust the mileage value you want.


For example, in the box “Adjusting mileage”, enter 4567, and then click “OK”.


Please can checking Write Data succeed!


Related Posts:

How to Update Yanhua Digimaster3

How to instalallation Digimaster 3 software

How to Operation Digimaster3

Difference between digimaster3 and digiprog3

About Sales 1875 Articles specializes in manufacturing and exporting car & truck OBD OBD2 EOBD diagnostic tools to worldwide.