One customer gave feedback that he cannot connect to the interface when using SVCI 2020 V38.1 software to read and write CS, MAC, PIN of ECU while version V18 and V24 does work.
It always says “Connecting to the interface, please wait…” and “Connection Error: Interface not connected! If you have already connected the interface, please try to reconnect it and/or restart the application. NOTE: The interface should be connected with a car”.
The reason for “Connection Error” is because he didn’t upgrade the SVCI 2020 firmware to latest version.
SVCI 2020 Firmware Upgrade Steps
Step 1. Start SVCI 2020 software list, click SVCI 2020 icon down at the bottom.
Step 2. Wait until the firmware was downloading from server successfully, click “upgrade”.
Step 3. Select firmware procedure 2 , click “Start” to update, click “OK” when finished.
Step 4. Select firmware procedure 1, click “Start” to update again, click “OK” when finished.
It says connecting is successful, SVCI 2020 firmware upgrade has been done!
SVCI 2020Commander firmware upgrade full operation:
This is a quick tutorial about how to update the firmware of SVCI 2020 Abrite Commander. Thanks to https://www.obd2shop.co.uk/